Removing the palm-rest and keyboard
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
optical-drive connector
5. Remove the fan.
6. Remove the
solid-state drive/Intel
7. Remove the
wireless
card.
8. Remove the speakers.
9. Remove the
hard
drive.
10. Remove the touchpad.
11. Remove the
power-adapter
12. Remove the
display
assembly.
13. Remove the
I/O
board.
14. Remove the
power-button
15. Remove the
system
board.
16. Remove the
power button with fingerprint reader
Procedure
About this task
After performing the above steps, we are left with the palm-rest and keyboard assembly.
104
Removing the palm-rest and keyboard assembly
computer. After working inside your computer, follow the instructions in
board.
Optane.
port.
board.
(optional).
44
assembly
After working
www.dell.com/