Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
About this task
NOTE:
If the rubber grommets are pushed out when removing the speakers, push them back in before replacing the
speakers.
Steps
1. Using the alignment posts and rubber grommets, place the left and right speakers in the slots on the palm-rest and keyboard
assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
Replacing the speakers
computer. After working inside your computer, follow the instructions in
27
After working
www.dell.com/
Replacing the speakers
59
Advertisement
Table of Contents
