Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the
wireless
card.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
Procedure
Steps
1. Remove the four screws (M2x2.5) that secure the display panel to the display back-cover and antenna assembly.
2. Lift the display panel and turn it over.
Removing the display panel
computer. After working inside your computer, follow the instructions in
After working
www.dell.com/
Removing the display panel
50
115
Advertisement
Table of Contents
