Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
About this task
NOTE:
Ensure that the hinges are opened to the maximum before replacing the display assembly on palm-rest and
keyboard assembly.
Steps
1. Slide the palm-rest and keyboard assembly under the hinges on the display assembly
2. Place and align the palm-rest and keyboard assembly on the display assembly.
3. Using the alignment posts, press the hinges down on the system board and the palm-rest and keyboard assembly.
4. Replace the six screws (M2x2.5) that secure the left and right hinges to the system board and palm-rest and keyboard
assembly.
5. Route the display cable through the routing guides on the fan and the palm-rest and keyboard assembly.
94
Replacing the display assembly
Replacing the display assembly
computer. After working inside your computer, follow the instructions in
41
After working
www.dell.com/
Advertisement
Table of Contents
