Section2
SmartMonitor ZS
SmartMonitor ZS
ZS-HL is provided with the SmartMonitor ZS software utility. This utility allows you to set up
sensing functions and monitor the waveforms of measurement results on a personal computer.
Monitoring the measurement state
Checks the measured value of the gang-mounted
controller in the list.
Setting support for functions
Sets the sensing conditions in detail while checking
the receiving status of the Sensor Head (sensitivity).
If you use SmartMonitor ZS Professional, which is sold separately, you can also do the following:
• Display multiple CH waveforms using multiple controllers.
• Perform logging for the measured value.
Operating Environment
The following describes the operating environment for SmartMonitor ZS. Please check them.
Item
OS
CPU
Memory
Display
• Windows is a trademark or registered trademark of Microsoft Corporation.
ZS-HL
2-14
User's Manual
USB cable
Receiving
status
Line bright
Windows7 (32 bit / 64 bit)
Windows XP (At least Service Pack 3, 32 bit)
Intel Pentium Ⅲ at least 1GHz(recommend 2GHz or more)
At least 1GB
At least 1024 × 768 dots, at least 1.6 million Color
SmartMonitor ZS
(accessory for ZS-HLDC_1A)
Displays the change of the time series for the mea-
sured value in a graph.
Displays and sets the settings for the controller
in the list.
Condition