Selection Option - Program Sequence With Welding Power Rotary Knob (P30); Reset To Factory Settings - EWM Control HP-XQ Operating Instructions Manual

Functional characteristics
Special parameters (advanced settings)
5.10.1.27 Selection option – Program sequence with welding power rotary knob (P30)
Function not active
• The rotary knob is locked, use the welding parameters push-button to select the welding parameters.
Function active
• Rotary knob can be used to select the welding parameters.

5.10.2 Reset to factory settings

All special parameters saved by the user will be overwritten by the factory settings!
74
+
Figure 5-59
099-00HPXQ-EW501
07.05.2021