Setting Advanced Welding Parameters (Expert Menu); Changing Basic Settings (Machine Configuration Menu); Lock Function - EWM Control HP-XQ Operating Instructions Manual

Machine control – Operating elements
Operating the machine control
4.3.4

Setting advanced welding parameters (Expert menu)

The Expert menu contains functions and parameters which cannot be set directly in the machine control
or which do not need to be et on a regular basis. The number and display of these parameters depends
on the previously selected welding procedure or the functions. To select them hold the welding power
click wheel (> 2 s). Select the required parameter/menu item by turning (navigating) and pressing the
click wheel. Additionally or alternatively, you can use the welding parameters push-button for navigation.
4.3.5

Changing basic settings (machine configuration menu)

The basic welding system functions can be adjusted in the machine configuration menu. Only experi-
enced users should change the settings > see 5.11 chapter.
4.3.6

Lock function

The lock function protects against accidental adjustment of the device settings.
The user can switch the lock function on or off by pressing the button for a long time from each machine
control or accessory component with the symbol
22
.
099-00HPXQ-EW501
07.05.2021