Troubles And Troubleshooting; Delivery Set; Technical Specifications - BRAYER BR1115 Instruction Manual

18 EN

TROUBLES AND TROUBLESHOOTING

Problem Cause
The coffee No voltage in the
maker can't be mains socket.
switched on
The power plug is not
completely inserted
into the socket
Water leaks from The water tray is full
the lower part of
the unit
Coffee leakage Loose connection of
from the filter the filter and boiler
holder gasket, ground coffee
got on the edges of
the filter
Coffee has a Wrong process of
foreign smell scale removal in the
boiler
Improper storage of
coffee.
Steam doesn't
froth milk
Solution
Make sure that the mains
socket is operating by
connecting a known good
electric appliance to it.
Disconnect the power plug
and connect it into the
socket

DELIVERY SET

Pour out water from the tray
1.
2.
Clean the edges of the filter
3.
4.

TECHNICAL SPECIFICATIONS

See the chapters «Before
• Power supply 220-240 V, ~ 50-60 Hz
using the unit», «Descaling»
and perform them several • Rated input power: 1300 W
times
• Water tank capacity: 1,5 l
Use fresh ground coffee.
• Milk tank capacity: 0,5 l
Keep coffee in a dry cool
place.
RECYCLING
You used skimmed
milk
Milk is not cold
enough
The cappuccinator
pipe is blocked
Coffee maker – 1pc.
Coffee filter – 2 pcs.
Measuring spoon – 1 pc.
Instruction manual – 1 pc.
To prevent possible damage to the
environment or harm to the health of people
by uncontrolled waste disposal, after
expiration of the service life of the unit or
the batteries (if included), do not discard
Use only whole milk with fat
content 4-6%
Use cold milk
Clean the cappuccinator
pipe and the cappuccinator
lid (see the chapter
«CLEANING THE
CAPPUCCINATOR»)