BRAYER BR1115 Instruction Manual page 11

• When the coffee maker is ready for operation, the light
indicator (7, 8, 9) will glow constantly.
• To make one cup of espresso, use the small filter (21)
and press the «Espresso»-button (7) once; the light
indicator « » will light up.
• To make two cups of espresso, use the larger filter (22)
and press the «Espresso»-button (7) twice; the light
indicator « » will light up. In this case set one big or
two small cups on the grid (2 or 3).
Notes:
- if you need to switch the coffee maker off during the
espresso making, press the «Espresso»-button (7)
again;
- successive making of coffee should be performed
with intervals 2-3 min.
• Remove the cup with ready drink from the grid (2 or 3).
• After you finish using the coffee maker, switch the
coffee maker off by setting the switch (11) «0/I» to the
position «0».
• Wait until the coffee maker cools down, remove the
filter holder (20) and wash the installed filter (21 or 22).
ESPRESSO PORTION SETTING
• When making espresso, press and hold the button
(7) « » for 3 seconds, the one cup indicator « » will
be flashing. When the desired amount of espresso is
dispensed, release the button (7). The maximal amount
of one cup of coffee is about 90 ml.
• Next time when you make espresso, the preset amount
of ready coffee will be poured into the cup.
• When making espresso, press twice and hold the button
(7) « » for 3 seconds, the two cups indicator « » will
be flashing. When the desired amount of espresso is
dispensed, release the button (7). Maximal amount of
double portion of coffee is about 130 ml.
• Next time when you make espresso, the preset amount
of ready coffee will be poured into the cup
Notes:
- minimal and maximal amount of espresso
are specified in the table «CHOOSING THE
APPROPRIATE CUP»;
- if you need to make a lesser amount of coffee then it
was set, press the button (7) again when the cup is
filled with necessary amount of ready coffee.
Return to the factory settings
• To return to the factory settings switch the coffee maker
off by setting the switch (11) «0/I» to the position «0».
• Press and hold the button (7) «Espresso», switch the
coffee maker on by setting the power switch (11) «0/I»
to the position «I», the buttons « » and « » indicators
will flash 5 times.
• The coffee maker is ready for operation with the factory
settings.
EN 11