Cleaning The Coffee Maker; Troubleshooting - BRAYER BR1113 Instruction Manual

Note: to remove the scale you can use special
descaling agents for coffee makers and coffee
machines, strictly following the instructions on their
usage.

CLEANING THE COFFEE MAKER

• If there is ground coffee scale remainin in the filter (5)
openings, clean the filter (5) with a small brush.
• Wipe the coffee maker body with a soft, slightly
damp cloth and then wipe the coffee maker body (11)
dry. Do not use abrasives and solvents to clean the
coffee maker body.
• Do not immerse the coffee maker body (11), the
power cord and the power plug into water or any
other liquids.
• Wash the removable parts of the coffee maker with
warm water and neutral detergent, then rinse them
and dry.
DRIP TRAY (1)
• A red pop-up indicator (3) in the grid (2) will show
when the tray (1) is full.
• Remove the grid (2) from the tray (1), remove the
tray (1) and pour out water, install the tray back to its
place, put the grid (2) on the tray (1).
• If necessary, wash the tray (1) and the grid (2) with
water and soft detergent, rinse and dry.

TROUBLESHOOTING

Problem Cause
The tray is full of
Water leaks from water.
the bottom of the The coffee
coffee maker maker is
damaged.
There is ground
Water leaks from
coffee on the
the filter holder.
filter.
The coffee
maker was not
washed after
Ready coffee
descaling.
has unpleasant
Ground coffee
taste.
was stored in a
humid place for
a long time.
No voltage in the
mains socket.
The unit cannot
The power plug
be switched on
is not completely
inserted into the
socket.
The steam ready
indicator is
flashing..
The used cup
Steam doesn't
does not suit
froth milk
for proper milk
frothing.
You used
skimmed milk.
EN 13
Solution
Please, clean the tray.
Please, apply to the service
center for repairing the
coffee maker.
Clean the filter edges from
ground coffee.
Clean the coffee maker
from mineral scale and
wash it from the remaining
descaling agent.
Please, use fresh ground
coffee. Keep unused
ground coffee in a hermetic
package in a dry cool place.
Make sure that the mains
socket is properly operating.
Check whether the power
plug is completely inserted
into the socket.
You can use steam to froth
milk only after the indicator
starts glowing white.
Use a tall and narrow cup.
Use only whole milk with fat
content 4-6%.