TP-Link Tapo H100 - Smart Hub Quick Start Guide

Meet Your Tapo Hub

Tapo is the easy way to turn your home into a smart home. At the center of it all is the Tapo Hub.
With superior ultra-low-power performance, Tapo Hub connects wirelessly with a wide range of Tapo accessories. So you can easily control and monitor your home from anywhere.

LED Status

Solid blue
Starting up
Blinking orange
Connecting to Wi-Fi
Blinking blue slowly
Pairing with Tapo accessory
Blinking orange and blue
Ready for setup
Solid blue
Connected to Wi-Fi
Solid orange
Offline

SYNC Button

Single press
Enter pairing mode;
Silence when ringing.
Press and hold for 5s
Only reset Wi-Fi settings and keep other settings.
Press and hold for 10s
Restore your hub to factory default settings.

Download Tapo App

Get the Tapo app from the App Store or Google Play.

OR

Set Up Your Tapo Hub

Tap the button in the app and select Hubs. Follow the in-app instructions to complete setup.

Add Tapo Accessories

After the Tapo hub is successfully added, connect your Tapo devices to your hub.

Support
For technical support, the user guide, FAQs, warranty and more, please visit https://www.tapo.com/support/

Safety Information
Do not install in a socket facing downward.
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device.