Chapter 12 User Manage Commands; User Name (Password) - TP-Link T3700G-28TQ Cli Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide

Chapter 12 User Manage Commands

User Manage Commands are used to manage the user's logging information by Web, Telnet or
SSH, so as to protect the settings of the switch from being randomly changed.

user name (password)

Description
The user name command is used to add a new user or modify the existed
users' information. To delete the existed users, please use no user name
command. This command uses the symmetric encryption.
Syntax
user name name [ privilege admin | guest ] password { [ 0 ] password | 7
encrypted-password }
no user name name
Parameter
name ——Type a name for users' login, which contains 16 characters at most,
composed of digits, English letters and under dashes only.
admin | guest —— Access level. "Admin" means that you can edit, modify and
view all the settings of different functions. "Guest" means that you can only view
the settings without the right to edit and modify. It is "admin" by default.
0 —— Specify the encryption type. 0 indicates that an unencrypted password
will follow. By default, the encryption type is 0.
password —— Users' login password, a string from 1 to 31 alphanumeric
characters or symbols. The password is case sensitive, allows spaces but
ignores leading spaces, and cannot contain question marks. By default, it is
empty.
7 —— Indicates a symmetric encrypted password with fixed length will follow.
encrypted-password —— A symmetric encrypted password with fixed length,
which you can copy from another switch's configuration file. After the encrypted
password is configured, you should use the corresponding unencrypted
password if you re-enter this mode.
76