Ac Power; Switch Aspect Description; Front Panel - TP-Link TL-SG2109WEB User Manual

TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
2. Insert the switch into the rack.
3. Fix the switch to the rack with the rack screws (not provided).

3.1.3 AC Power

The switch can be used with AC power supply 100 to 240V AC,50 to 60Hz.
The switch's power supply will adjust to the local power source automatically.

3.2 Switch Aspect Description

3.2.1 Front Panel

The front panel of TL-SL2210WEB is configured as follows:
Power Link
Act
System 100M
8 10/100Mbps RJ-45 ports: designed to connect to the device with the

bandwidth of 10M or 100M.Each port has a corresponding Link/Act and
10/100Mbps LED.
1 10/100/1000Mbps RJ-45 ports: designed to connect to the device with

the bandwidth of 10M, 100M or 1000M. It has a corresponding Link/Act
and 10/100/1000Mbps LED.
1 SFP ports: designed to install SFP module. It has a corresponding

1000Mbps Link/Act LED.
Reset Button: Press this button for three seconds to the reset software

setting back to factory default setting.
LEDS

8
R
TL-SL2210WEB
8+2G Web-Smart Switch
1
Link/Act
1 2 3 4 5 6 7 8
1000M
GIGA RESET
Figure 3-2. TL-SL2210WEB Front Panel
Web Smart Gigabit Switch Family User's Guide
5 7
2 3 4 6
10/100Mbps
8 GIGA SFP
Link/Act
10/100/1000Mbps 1000Mbps