Table of Contents
Advertisement
3.2.3
Mounting the flush plate
Visign for More 104 equipment set
Requirements:
The cartridge valve is mounted and set.
n
The basic panel has been mounted.
n
Determine the length of the actuating rod. The tip of the rod must lie
17 mm behind the front edge of the basic panel.
Shorten the actuating rod with a saw.
Turn the actuating rod into the cartridge and counter with the
threaded nut.
Place the flush plate onto the basic panel.
INFO! Figure shows model 8351.2 as an example.
Handling
10 from 12
Advertisement
Table of Contents
