Setting Parameters Via Communication P8 - SMC Networks ITV23 Series Operation Manual

Setting parameters via communication
The output at the time of communication error, gain adjustment, sensitivity adjustment,
minimum pressure, maximum pressure, and notification of accumulated time can also be set
via communication.
Do not configure settings using the button operation and communication at the same time. If
settings are made by both methods, unintended settings may be configured.
Item
Output at the time of communication error
Gain setting
Sensitivity setting
Setting of Min. pressure, Max. pressure
Notification setting of the accumulated energizing time
Key locking function
Zero clear
Initialize
Reset function
Parameter name
Function
Value
* Indicates the initial value.
Output at the time of communication error (Hold/Clear setting)
This is the output pressure setting when a communication error occurs.
Initial value：Pressure Clear
*
0 Pressure Clear
1 Pressure Hold
communication
〇
〇
〇
〇
〇
-
-
-
-
Setting
- 8 -
button
P8 -
P9 P17
〇
P10 P18
〇
P11 P15
〇
P12 -
- P14
〇
- P19
〇
- P20
〇
- P20
〇
-
-