Operation; Switching The Vehicle On - HAKO 7580.32 Instruction Manual

Operation

3.3 Operation
The scrubber drier can be operated on
surfaces with a gradient of 6% for max-
imally 5 minutes.
Adapt your driving style to the
local conditions (floor charac-
teristics, persons in the vicinity,
obstacles etc.).

3.3.1 Switching the vehicle on

Please read Section 1 before
switching the vehicle on.
Carry out the following steps so that the
vehicle is ready to operate:
• Disconnect the battery plug from the
charger and connect it to the vehicle.
50
When connecting the battery
plug to the vehicle, switch the
key switch to off (lock posi-
tion 0) beforehand.
• The vehicle is equipped with a safety
shutdown via a seat contact (dead
man's switch). This means that it is
essential for operating personnel to
be seated in the driver's seat to be
able to operate the vehicle.
• Ensure that the driving direction
switch is in its neutral setting, refer to
Accelerator in Section 3.2.1 for driv-
ing forwards and backwards.
Fig. 21
• Actuate the service brake with your
foot in order to prevent accidentally
accelerating the vehicle, refer to Ser-
vice Brake in Section 3.2.1.
• Insert the key in the key switch
(Fig. 21).
• Turn the key from lock position 0 to
position 1. 
The vehicle is ready to operate.