Table of Contents
Advertisement
Thermal Management 2
If enabled, this feature allows you to select between Thermal Manager 1 and
Thermal Manager 2. The options are Disable or Enable.
Processor Power Management
This feature allows the user to determine the processor power management
mode. The options are Disabled and C States Only. If set to Disabled, C States
and GV1/GV3 are disabled. If set to C States only, the processor power will be
controlled through CPU power states in the APCI setting.
I/O Device Confi guration
Access the submenu to make changes to the following settings.
KBC Clock Input
This setting allows you to select clock frequency for KBC. The options are 6MHz,
8MHz, 12MHz and 16MHz.
On-board COM1
This setting allows you to assign control of serial port A. The options are Enabled
(user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
Select the base I/O address for serial port A. The options are 3F8, 2F8,
3E8 and 2E8.
Interrupt
Select the IRQ (interrupt request) for serial port A. The options are IRQ3
and IRQ4.
7-13
Chapter 7: BIOS
Advertisement
Table of Contents
