Table of Contents
Advertisement
3. Gently press down on the DIMM module until it snaps into place in the slot.
Repeat for all modules (see step 1 above).
Memory Support
The X6DHT-G supports up to 32 GB of DDR266 or up to 16 GB of DDR333
SDRAM. You should not mix DIMMs of different sizes and speeds. See Figure
5-5 for installing and removing memory modules.
Figure 5-5. Installing DIMM into Slot
To Install: Insert module vertically and press down until it snaps into place. Pay attention
to the bottom notch.
To Remove: Use your thumbs to gently push each release tab outward to free the DIMM
from the slot.
Figure 5-5b. Top View of DDR Slot
Chapter 5: Advanced Serverboard Setup
5-7
Advertisement
Table of Contents
