Table of Contents
Advertisement
S
S
UPER
ERVER 6024H-TR/6024H-T User's Manual
ECC Error Type
This setting lets you select which type of interrupt to be activated as a result
of an ECC error. The options are None, NMI (Non-Maskable Interrupt), SMI
(System Management Interrupt) and SCI (System Control Interrupt.)
SERR Signal Condition
This setting specifi es the ECC Error conditions that an SERR# is to be asserted.
The options are None, Single Bit, Multiple Bit and Both.
USB Device 29, Function 0 & 1
This setting allows you to Enable or Disable two functions for the USB devices
specifi ed.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The settings
are Enabled and Disabled.
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Hyper-threading
This setting allows you to Enable or Disable the function of hyper-threading.
Enabling hyper-threading results in increased CPU performance. (Applicable
for the XP systems.)
Machine Checking
Enable this feature to allow the operating system to debug a system crash after
a reset. The options are Disabled and Enabled.
No Execute Mode Memory Protection
Enable this feature to enable the functionality of Execute Disable Bit and allow
the processor to classify areas in memory where an application code can execute
and where it can not, and thus, preventing a worm or a virus from inserting
and creating a fl ood of codes that will overwhelm the processor or damage the
system during an attack. (*Note: this feature is available when your OS and your
CPU support the function of Execute Disable Bit.) The options are Disabled and
Enabled. (Note: For more information regarding hardware/software support for
this function, please refer to Intel's and Microsoft's web sites.)
7-12
Advertisement
Table of Contents
