Thermo Scientific STERI-CYCLE i160 LK User Manual page 231

Chapter 5 Service
4. Unpack the new membranes.
5. Insert the new membrane frame and press firmly in the radial direction.
6. Visually inspect from the inside, whether the gasket lip is correctly seated, if necessary press
from the outside.
7. Insert the second membrane according to 5. and 6.
Warning Contamination hazard!
Damaged or improperly mounted membranes can contaminate the user or the environment!
8. Insert the work tray over the tilting stop and push into the interior.
Cell Locker 50155007_C 27.05.21
13
Thermo Fisher Scientific