Thermo Scientific STERI-CYCLE i160 LK User Manual page 202

12
Data Communication
Program STERI-CYCLE i160 LK / STERI-CYCLE i250 LK
Function of the user menu:
PRESETTING
The submenu PRESETTING is used to set the transmission speed and to select the serial port.
1. Select a transmission speed within the range of 9,600 to 115,200 baud.
2. Select the serial port of the PC. If the USB driver is installed, the (virtual) Com Port assigned to
the USB port can be selected (see
3. Accept the settings:
• Press the CHANGE key.
4. Save the settings (in an INI file):
• Press the SAVE TO FILE key.
Note Transmission speeds:
The transmission speed settings in the user menu PRESETTING and of the device must be
identical!
S i160 LK / i250 LK
TERI-CYCLE
12-24
"USB Interface" on page 12-1).
Thermo Scientific