Table of Contents
Advertisement
SMBus to PCI-X/PCI-Exp. Slots
2
Jumpers JI
C1 and JI
connect the System Management Bus
2
(I
C) to the PCI-X/PCI-E slots. The
default setting is Open (Disabled.) Both
jumpers must be set to the same setting
See the table on the right for jumper
settings.
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each port, one LED indicates activity
while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
Onboard Power LED (LE1)
An Onboard Power LED is located at
LE1. This LED Indicator is lit when
the system is on. Be sure to unplug
the power cable before removing or
adding any components. See the table
on the right for more details.
Chapter 5: Advanced Serverboard Setup
2
C2 allow you to
Jumper Setting
JI
JI
5-19
SMBus to PCI-X/PCI-E Slots
Jumper Settings (JI
2
C1/JI
Defi nition
2
2
C1: Closed
JI
C2:Closed
2
C1: Open
JI
2
C2: Open
GLAN1/2 LED
(Connection Speed Indicator)
LED Color
Defi nition
Off
10 MHz
Green
100 MHz
Amber
1 GHz
Onboard Power LED Indicator
(LE1)
LED Color
Defi nition
Off
System Off
Green
System on
2
C2)
Enabled
Disabled
Advertisement
Table of Contents
