Table of Contents
Advertisement
S
S
UPER
ERVER 5015B-MF User's Manual
1-3
Server Chassis Features
The SC513L-260 features a unique design that places all I/O ports at the front of
the chassis for easy access. The following is a general outline of the main features
of the SC513L-260 chassis.
System Power
When confi gured as a SuperServer 5015B-MF, the SC513L-260 chassis includes
a single 260W power supply.
Serial ATA Subsystem
The SC513L-260 chassis was designed to support one internal 3.5" Serial ATA hard
drive. This Serial ATA drive is not hot-swappable; power must be removed from
the system before installing or replacing. ATA/100 IDE drives can be alternately
supported.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Control Panel
The control panel on the SC513L-260 provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activ-
ity and system overheat conditions. The control panel also includes a main power
button and a system reset button.
Front I/O Panel
The I/O panel for the SC513L-260 is located on the front side of the chassis. It
provides one COM port, two USB ports, PS/2 mouse and keyboard ports, a graphics
port and two Gb Ethernet ports.
Cooling System
The SC513L-260 chassis has an innovative cooling design that features one 10-cm
blower-type system cooling fan. The blower fan plugs into a chassis fan header
on the motherboard and an air shroud channels the airfl ow to effi ciently cool the
processor area.
A fan speed control setting in BIOS allows fan speed to be determined by system
temperature [the recommended setting is 3-pn (Server)].
1-4
Advertisement
Table of Contents
