Table of Contents
Advertisement
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. Attach an appropriate
cable from the chassis to inform you
of a chassis intrusion when the chas-
sis is opened
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL on the serverboard. See
the table on the right for pin defi ni-
tions. You must also have a LAN card
with a Wake-On-LAN connector and
cable to use this feature.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows your
computer to receive and be "awak-
ened" by an incoming call when in the
suspend state. See the table on the
right for pin defi nitions. You must also
have a WOR card and cable to use
this feature.
External Speaker/Internal
Buzzer
On the JD1 header, pins 1-4 are for an
external speaker and pins 3-4 are for the
internal speaker. If you wish to use an ex-
ternal speaker, connect it to pins 1-4 to. If
you wish to use the onboard speaker, you
should close pins 3-4 with a jumper.
LAN1/2 (Ethernet Ports)
Two Ethernet ports (designated LAN1
and LAN2) are located beside the VGA
port on the I/O backplane. These ports
accept RJ45 type cables.
Chapter 5: Advanced Serverboard Setup
Chassis Intrusion
Pin Defi nitions (JL1)
Pin#
1
2
Pin#
1
2
3
Pin#
1
2
Speaker Connector
Pin Setting
Pins 3-4
Pins 1-4
5-15
Defi nition
Intrusion Input
Ground
Wake-On-LAN
Pin Defi nitions
(JWOL)
Defi nition
+5V Standby
Ground
Wake-up
Wake-On-Ring
Pin Defi nitions
(JWOR)
Defi nition
Ground (Black)
Wake-up
(JD1)
Defi nition
Internal Speaker
External Speaker
Advertisement
Table of Contents
