Engine Starting Sequence - Miller Big Blue 600 Air Pak Owner's Manual

6-3. Engine Starting Sequence

Service Reminder
Engine Oil
Compressor Oil
1
NOTICE − Do not use ether or other starting
fluids. Using starting fluids voids warranty.
.
If engine does not start, let engine
come to a complete stop before at-
tempting restart.
Notes
.
Complete Parts List available at www.MillerWelds.com
Wait to Start/Preheating
Remaining
0
0
To Start:
1 Wait to Start/Preheating Display
The Wait to Start display appears when the
Engine Control switch is placed in the Run
or Run/Idle position. Glow plugs function
automatically according to ambient temper-
ature. The operator needs to pause at
either switch position while the engine con-
troller goes through the preheat sequence.
Remaining
Service Reminder
Engine Oil 480
495
Compressor Oil
Once this message clears, the engine can
be started.
Turn Engine Control switch to Start. Re-
lease Engine Control switch when engine
starts.
To Stop: turn Engine Control switch to Off
position.
OM-279640 Page 41