Dimensions, Weights, And Operating Angles; Duty Cycle And Overheating - Miller Big Blue 600 Air Pak Owner's Manual

4-5. Dimensions, Weights, And Operating Angles

Dimensions
53.75 in. (1365 mm)
Height
(to top of exhaust)
28.5 in. (724 mm)
(mtg. brackets turned in)
Width
31.06 in. (789 mm)
(mtg. brackets turned out)
Depth 69.5 in. (1765 mm)
A 69.5 in. (1765 mm)
B* 57.9 in. (1470 mm)
C* 52.88 in. (1343 mm)
D* 5.02 in. (128 mm)
E 27.85 in. (707 mm)
F 1 in. (25 mm)
G 29.81 in. (757 mm)
9/16 in. (14 mm) Dia.
H
4 Holes
* With mounting brackets in center
position. Dimensions vary with
location of mounting brackets.
Weight
Big Blue
No fuel: 2095 lb (950 kg)
800 Duo
W/fuel: 2275 lb (1032 kg)
Air Pak
Big Blue No fuel: 2040 lb (925 kg)
W/fuel: 2220 lb (1007 kg)
600 Air Pak
Big Blue
No fuel: 1869 lb (848 kg)
800
W/fuel: 2034 lb (923 kg)
Duo Pro
Lifting Eye Weight Rating:
2500 lb (1134 kg) Maximum

4-6. Duty Cycle And Overheating

OM-279640 Page 20
.
Complete Parts List available at www.MillerWelds.com
A
B C
H
D
1
Continuous Welding
G
! Do not exceed tilt angles or engine could
be damaged or unit could tip.
! Do not move or operate unit where it could
tip.
°
15
°
15
F
E
802 161-A
907752
1 100% Duty Cycle
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
.
Dual operator units are rated
for welding at 400 amperes
continuously in dual operator
mode or 800 amperes continu-
ously in single operator mode.
.
Single operator units are rated
for welding at 575 amperes
continuously.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.
°
30
°
30