Engine Starting Sequence - Miller Big Blue 500 Pro Owner's Manual

6-3. Engine Starting Sequence

1
NOTICE − Do not use ether or other start-
ing fluids. Using starting fluids voids war-
ranty.
To Start:
1 Wait to Start/Preheating Display
The Wait to Start display appears when the
Notes
OM-278739 Page 32
.
Complete Parts List available at www.MillerWelds.com
Wait to Start/Preheating
Service Reminder Remaining
Engine Oil 0
0
Compressor Oil
Engine Control switch is placed in the Run
or Run/Idle position. Glow plugs function
automatically according to ambient tem-
perature. The operator needs to pause at
either switch position while the engine con-
troller goes through the preheat sequence.
Once this message clears, the engine can
Remaining
Service Reminder
Engine Oil 480
495
Compressor Oil
be started.
Turn Engine Control switch to Start. Re-
lease Engine Control switch when engine
starts.
To Stop: turn Engine Control switch to Off
position.