Section 3 − Definitions; Additional Safety Symbols And Definitions - Miller Big Blue 600 Air Pak Owner's Manual

3-1. Additional Safety Symbols And Definitions

.
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Protect yourself from electric shock by insulating yourself from work and ground.
Keep your head out of the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use ventilating fan to remove fumes.
Keep flammables away from welding. Do not weld near flammables.
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Do not weld on drums or any closed containers.
Do not remove or paint over (cover) the label.
.
Complete Parts List available at www.MillerWelds.com
SECTION 3 − DEFINITIONS
Safe1 2012−05
Safe2 2017−04
Safe3 2017−04
Safe6 2017−04
Safe8 2012−05
Safe10 2012−05
Safe12 2012−05
Safe14 2012−05
Safe16 2017−04
Safe20 2017−04
OM-279640 Page 15