Engine Block Heater Operation - Miller Big Blue 600 Air Pak Owner's Manual

6-10. Engine Block Heater Operation

Coolant Heater
Specifications
±
Watts Volts 10%
530 120
Notes
OM-279640 Page 48
.
Complete Parts List available at www.MillerWelds.com
1 Engine Block Heater Plug
Use heater to maintain a constant
engine coolant temperature.
To turn on heater, connect heater
plug to 120 volts AC receptacle.
! Do not run engine while en-
gine block heater is on.
NOTICE −In extremely cold weath-
er, heater should be connected to
120 volts AC receptacle when en-
gine is warm.
! The area near the engine
block heater gets hot.
Disconnect plug to turn off heater.
1
Coolant heater1 2012−05 907752 / Ref. 803 145