Sharp MX-B402 Operation Manual page 557

Select the special modes.
(1) Touch the tab of the mode that you wish to use.
3
(2) Touch the [Special Modes] key.
(3) Touch the [Card Shot] key.
☞
SPECIAL MODES
(1)
Scan/Special Modes
Card Shot
3
X
2
Y
4
Y
X
• You can also touch the
• The send size will be selected automatically based on the entered original size.
• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the
send size. In this case, touch the [Scan Size] key to display the screen for this procedure. For the procedure for
setting the send size, see
Press the [START] key to scan the front side of the card.
5
To cancel scanning...
Press the [STOP] key (
(page 5-74)
(A) (B) (2)
OK
Cancel OK
3
(1 8 1/2)
8
Fit to
inch
Send Size
1
(1 8 1/2)
8
inch
Size Reset
X
keys to change the number.
"Specifying the send size of the
) to cancel the operation.
Specify the original size.
(1) Enter the original size.
• Touch the X (width) numeric value display key and
enter the width.
• Touch the Y (height) numeric value display key and
enter the height.
(A) To return the original size to the default size, touch the
[Size Reset] key.
(B) To automatically enlarge or reduce the image to fit the
send size, touch the [Fit to Send Size] key. If you wish
to scan the original at the entered original size, there
is no need to touch this key.
(2) Touch the [OK] key.
Y
image" (page 5-62).
5-84
SCANNER/INTERNET FAX
Contents