Checking A Preview Image Of A Copy (Preview) - Sharp MX-B402 Operation Manual

CHECKING A PREVIEW IMAGE OF A COPY
(Preview)
You can touch the [Preview] key so that it is highlighted in the base screen and then scan the original to check a preview
image of the copy in the touch panel before printing the copy.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
Place the original in the automatic document feeder.
☞
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER
Exposure
Auto
2
Copy Ratio Original
100%
Select copy settings and press the [START] key.
3
After the original is scanned, a preview image of the copy appears in the touch panel. The copy is not printed until the [Start
Copy] key is touched in the preview screen.
Preview
4
0001
If you need to change the copy settings, touch the [Reset] key.
To cancel copying...
Press the [STOP] key (
Special Modes
2-Sided Copy
Plain
8½x11
Output
1. 8½x11
5½x8½
2.
File
8½x14
3.
8½x11
4.
Quick File
Paper Select
Auto
8½x11
Preview
Plain
Reset
Display Output
Function Rev.
Display Rotation
Start Copy
/0010
).
(page 1-37)
Touch the [Preview] key so that it is
highlighted.
Check the preview image and then touch
the [Start Copy] key.
Copy printing begins.
For details on the preview screen, see
(page 2-103).
2-101
COPIER
"PREVIEW SCREEN"
Contents