Sending An Image In Usb Memory Mode - Sharp MX-B402 Operation Manual

Hide thumbs Also See for MX-B402:

Table of Contents

SENDING AN IMAGE IN USB MEMORY MODE

Follow the steps below to send a scanned image to a commercially available USB memory device that has been

connected to the machine. This stores the file in the USB device.

• Use a FAT32 USB memory with a capacity of no more than 32 GB.

• When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot

be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below.

Connect the USB memory to the USB

connector (Type A) on the machine.

SCANNER/INTERNET FAX

Table of Contents