Sharp MX-B402 Operation Manual page 392

MX-B402:
MX-B402SC:
Fax/Original
Original Exit
Upper Exit
Place
3
Original Size
5½x8½ 8½x14
8½x11 8½x13
8½x13
Size Input
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum length that can be scanned is 19-5/8" (500 mm) (the maximum height is 8-1/2" (216 mm)).
• To specify an AB size for the scan size, touch the [AB
scan size.
MX-B402SC Only
• In the situations below, the original exit place is fixed to the heavy exit.
- When "Card Size" is selected
- When the original guide is set to 2 7/8" (74 mm) or lower (Except when "Check Size" is selected)
- When the automatic document feeder is scanning an original with an X (horizontal) value of 4 1/8" (105 mm) or
less
• When "Card Size" is selected, you cannot copy if the original guide is set to 2 7/8" (74 mm) or higher.
(1) (3)
OK
Heavy Exit
AB
Check Size
Inch
Long Size
Card Size
(2)
Specify the scan size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
Specify the scan size.
(1) Touch the original output destination.
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
Inch] key to highlight the [AB] side and then specify the
4-49
FACSIMILE
Contents