Sharp MX-B402 Operation Manual page 558

Turn the card over and press the [START] key to scan the reverse side of the
card.
The back of the card will be scanned using the same color mode as the front.
6
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key (
Place next original.
Press [Start].
When finished, press [Read-End].
7
If you will continue scanning additional cards, you can touch the [Configure] key to change the exposure, resolution,
scan size, and send size.
The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 4.
) to cancel the operation.
(Pg.No.x)
Configure Read-End
5-85
SCANNER/INTERNET FAX
Touch the [Read-End] key.
Contents