Sharp MX-B402 Operation Manual page 784

(4) Paper misfeed in the transport area
(5) Paper misfeed in the reversing unit
When opening the paper reversing section, open slowly
and gently. Jerking the section open may cause the
secondary transfer roller unit to detach, resulting in failure.
(6) Paper misfeed in the bypass tray
(7) Paper misfeed in tray 1 (side)
When the rotate knob is
turned in the direction of the
arrow, paper comes out for
above.
Open the right side cover,
open the paper conveyor
cover, and remove the
paper.
If the misfeed is not in the
above location, grasp the
handle on the secondary
transfer roller unit, slowly
open the unit, and remove
the paper.
Remove the misfed paper.
Open the right side cover
and remove the misfed
paper.
(8) Paper misfeed in tray 2 to tray 4 (side)
(9) Paper misfeed in tray 1 to tray 4 (in the
tray)
When pulling out a tray, be sure to open the right
cover and check for a paper misfeed. If a tray is pulled
out when there is a misfeed, the paper will tear and a
torn piece may remain in the machine, making it more
difficult to remove the misfed paper. To open the right
cover and check for a misfeed, follow the procedure in
(7) Paper misfeed in tray 1 (side)
in tray 2 to tray 4
8-13
TROUBLESHOOTING
The misfeed may have
occurred inside the machine.
Check carefully and remove
it.
When a paper gets twisted to
the roller, remove the tray
and remove the misfeed
paper.
or (8) Paper misfeed
(side).
Contents