Sharp MX-B402 Operation Manual page 369

• If memory becomes full while the first original page is being scanned, transmission will stop.
• In the following situations, the transmission will be automatically reserved (memory transmission)
- When the line is busy or a communication error occurs and automatic resending is enabled.
☞
WHEN THE LINE IS BUSY
- The machine is already using the line to send or receive a fax.
- Another fax transmission was reserved ahead of your fax.
- One of the following functions is being used for transmission:
Broadcast transmission, F-code transmission, timer transmission, Card Shot, Job Build, Business Card Scan
- The document glass is being used (except when the speaker is being used to dial).
• Up to 94 transmission jobs can be reserved.
• When the transmission is finished, the scanned original pages are cleared from memory. However, when the document
filing function is used, the transmitted fax is stored.
System Settings (Administrator): Quick On Line Sending
This is used to disable Quick Online transmission. In this case, fax transmissions will be sent by memory transmission
(reserved and then transmitted).
To fax thick originals or pages of a book, use the document glass.
☞
USING THE DOCUMENT GLASS FOR TRANSMISSION
1 1
When the document glass is being used for a transmission, Quick Online transmission will not operate.
(page 4-28), WHEN A COMMUNICATION ERROR OCCURS
(page 4-34)
4-26
(page 4-28)
Transmission
FACSIMILE
1
Contents