Nexcom DNA 130 User Manual page 57

Chapter 4: BIOS Setup
USB Configuration
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Chipset
xHCI Mode [Enable]
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
xHCI Mode
Enables or disables XHCI mode. When enabled, XHCI controller would be
disabled and none of the USB devices are detectable and usable during boot
and in OS. Do not disable it unless for debugging purposes.
Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
Miscellaneous Configuration
Once enabled, XHCI controller
would be function disabled, none
of the USB devices are detectable
and usable during boot and in
OS. Do not disable it unless
for debug
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
State After G3
Configures the power state when power is re-applied after a power failure
(G3 state).
43
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Chipset
Miscellaneous Configuration
State After G3 [S0 State]
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
Specify what state to go to when
power is re-applied after a
power failure (G3 state).
S0 State: System will boot
directly as soon as power
applied.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
DNA 130 User Manual