Output List For All Devices; Reboot; Rebooting - axing 8-0x Operation Instructions Manual

5.4.4.

Output list for all devices

You can create a common output list for all devices in the network.
 Select the headends to be included in the channel list.
Notes: The device to which you are logged on is named "This device" and is always selected.
 Click on EXPORT TO CSV.
A CSV file is generated which you can open or save.
5.5.

Reboot

5.5.1.

Rebooting

Under REBOOT THE SYSTEM the device can be rebooted.
 Click on REBOOT.
After rebooting, the password must be entered again.
Note: If input signals are temporarily unavailable (e.g. due to snow), the device will reboot every 10 minutes. This ensures that
all configured programmes will be available once the input signal becomes available again.
2023-10-05 | Technical improvements, changes in design, printing- and other errors reserved. | AXING-BA_MIP-8-16-0x.pdf Page 37 of 56