Bit Error Rate; Found Programmes; Deactivating A Tuner - axing 8-0x Operation Instructions Manual

4.1.3.

Bit error rate

The BIT ERROR RATE is shown. The amount of bit errors for the last 1,000,000 transferred bits is calculated.
4.1.4.

Found programmes

After a successful station scanning, the radio and TV stations are shown in the area FOUND PROGRAMS. The table contains
information about the Program Name, the Type, and the Encryption.
4.1.5.

Deactivating a tuner

If a tuner is not needed, it can be deactivated. The tuner then no longer searches for stations. In phase 2 and in the station list,
which can be printed as PDF, no programs are displayed for the tuner.
 Click TUNER 1...8/16 to select one tuner.
The Tuner enabled check box is set at the factory.
 To deactivate a tuner, deselect the Tuner enabled check box.
 Then click SAVE AND SCAN.
This deactivates the tuner.
2023-10-05 | Technical improvements, changes in design, printing- and other errors reserved. | AXING-BA_MIP-8-16-0x.pdf Page 17 of 56