Save Initialization Data; Upload Initialization Data - axing 8-0x Operation Instructions Manual

Operation instructions | MIP 8-0x | MIP 16-0x | MIP 8-0xN | MIP 12-0xN
5.4.2.

Save Initialization Data

In the section SAVE SYSTEM INITILIZATION DATA TO FILE you can save the current initialization data from phase 1 to 3 into a
file on your computer.
 Click on SAVE.
The config.dat file is generated. You can save these on your computer.
 Click on PDF TO PRINT.
A PDF of the configuration is generated that can be opened or saved.
Note: Password and IP address will not be saved.
5.4.3.

Upload Initialization Data

In the section UPLOAD SYSTEM INITILIZATION DATA FROM FILE you can upload the initialization data from a file to the device.
 Choose a CONFIGURATION FILE.
 Click on UPLOAD.
The upload will take a few seconds.
 After the upload you must log in again.
Page 36 of 56 AXING-BA_MIP-8-16-0x.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2023-10-05