2.2. OSD Menu Operations
All of the camera function can be set by the OSD (On Screen Display) menu.
Set the function through the OSD menu operation by the following procedure.
[Open / Close OSD menu]
Press the "ENTER" while the OSD menu is not displayed, then the OSD menu (MAIN
MENU) will be opened. To close the OSD menu, move the cursor to the "EXIT" and
press "ENTER".
[Shift to Each Setting Menu]
Use the "UP/DOWN" on the RC-01 to move the cursor to select each OSD menu
item, and press "ENTER" to open each function setting menu. In the each function
setting menu, to go back to the previous menu, move the cursor to the "RETURN",
and press "ENTER".
Press "ENTER" to open
the setting menu
Figure 2. MAIN MENU is opened
Figure 3. Shift to Each Setting Menu
7
To go back to the previous menu,
move the cursor to the
"RETURN", and press "ENTER"