Watec WAT-3200 User Manual
  1. Manuals
  2. Brands
  3. Watec Manuals
  4. Digital Camera
  5. WAT-3200
  6. User manual

Watec WAT-3200 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WAT-2200Mk-2 & WAT-3200
User's Manual
Rev. 1.10
Watec Co., Ltd.

Advertisement

Table of Contents
loading

Related Manuals for Watec WAT-3200

Summary of Contents for Watec WAT-3200

  • Page 1 WAT-2200Mk-2 & WAT-3200 User’s Manual Rev. 1.10 Watec Co., Ltd.

  • Page 2: Revision Record

    Revision Record Rev. Date Changes 1.00 2018/12/19 1.10 2022/07/13 Added description of the WAT-3200.

  • Page 3: Table Of Contents

    Table of Contents Revision Record ........................2 Table of Contents ........................3 About this manual......................5 Configuring the camera function ..................6 2.1. RC-02 (Remote Control) ..................6 2.2. RS232 ........................7 2.3. OSD Menu Operations..................... 9 Functions ........................11 3.1.
  • Page 4 3.4.7. AUTO SATURATE ..................21 3.4.8. AUTO EDGE ....................22 3.4.9. DISPLAY FUNCTION ..................23 3.4.10. Reset Picture Adjust(DEFAULT) ..............23 3.5. FUNCTIONS ......................24 3.5.1. Digital Zoom(DZOOM) ..................24 3.5.2. DEFOG ......................29 3.5.3. DWDR ......................30 3.5.4. MOTION DETECT ..................31 3.5.5.

  • Page 5: About This Manual

    When the settings of the camera is changed according to this manual, check to see that the operation and the effects of the changes made to the camera are acceptable. The WAT-2200 Mk-2 & WAT-3200 user’s manual is subject to change by design and the specifications of the product without notice.

  • Page 6: Configuring The Camera Function

    2. Configuring the camera function The function of the camera can be set by the RC-02 (remote control) or RS232. Utilize the option RC-02 (remote control) to set function through OSD (On Screen Display) menu. By RS232, through communication by the VISCA/Pelco-D/Pelco-P protocol, it is able to set the camera function through not only the OSD menu same as RC-02 but also without displaying the OSD menu.

  • Page 7: Rs232

    2.2. RS232 It is able to operate the OSD menu same as RC-02 by the RS232 communication. It is also able to change the function settings or acquire the current setting without displaying the OSD menu. See the “5.RS232 Command List” for the corresponding command. Connect the CB-03 to the REMOTE terminal on the rear of the camera and the control equipment such as a PC.
  • Page 8 Data Length None Parity Stop Bit None Flow Control WAT-2200Mk-2 and WAT-3200 is designed for the following camera operation by the VISCA/Pelco-D/Pelco-P protocol. Table 3. Corresponding Operation to Each Protocol Protocol Corresponding Operation *Not correspond to all of the OSD item.

  • Page 9: Osd Menu Operations

    2.3. OSD Menu Operations All of the camera function can be set by the OSD (On Screen Display) menu. Set the function through the OSD menu operation by the following procedure. [Open / Close OSD menu] Press the “ENTER” while the OSD menu is not displayed, or send the "OSD Open"/"OSD On"...
  • Page 10 Press “ENTER” to open the setting menu To go back to the previous menu, Figure 5. Shift to Each Setting Menu move the cursor to the "RETURN", and press “ENTER” [Change Settings] Use the “UP/DOWN” on the RC-02 (“Up/Down” command of the RS232) to move the cursor to select each OSD menu item, and press ”LEFT/RIGHT”...

  • Page 11: Functions

    3. Functions Set each function by the OSD menu. Part of the function can be set by the RS232 without displaying OSD menu. See the “5.RS232 Command List”. 3.1. EXPOSURE 3.1.1. AE MODE Set control method of shutter, slow shutter, gain and DC iris lens. Default: AUTO AUTO Automatically control the shutter speed (including SENS UP), gain and DC iris lens in...

  • Page 12: Shutter

    Table 5. The Max. and Min. the Shutter Speed of Each OUTPUT FORMAT Max. & Min. of the Shutter Speed (sec.) OUTPUT FORMAT (AE MODE=AUTO) 1080p60,1080p59,1080i60,1080i59, 1/60 - 1/10000 720p60,720p59 1080p50,1080i50,720p50 1/50 - 1/10000 1080p30,1080p29 1/30 - 1/10000 1080p25,1080p24 1/25 - 1/10000 SHUT FIX Gain automatically controls the brightness of the subject but the shutter speed is fixed.

  • Page 13: Gain

    3.1.3. GAIN Set the gain while the AE MODE is MANUAL. The configurable gain is 0, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65 and 72[dB]. 3.1.4. AGC MAX Set the max. value of gain while the AE MODE is AUTO or SHUT FIX. Selectable from OFF, LOW, MID and HIGH.

  • Page 14: Ae Bright

    3.1.6. AE BRIGHT Set the target brightness while the AE MODE is AUTO or SHUT FIX. The higher value is set, the brighter it gets when the AE is converged. The setting value range is 0-10. Default: 6 3.1.7. DC IRIS Open the setting menu by the ENTER operation while the cursor is matched with the DC IRIS.

  • Page 15: White Balance

    3.2. WHITE BALANCE 3.2.1. WHITE BALANCE MODE (MODE) Set the WHITE BALANCE control mode. This setting is not applicable for the WAT-3200. Default: ATW Table 8. WHITE BALANCE - MODE Menu Value Description Item Automatically follow WHITE BALANCE (Approx. 2000K-15000K) by matching the color temperature of a subject.

  • Page 16: B-Gain(Blue)

    3.2.3. B-Gain (BLUE) Set the B and R gain value while the WHITE BALANCE mode is “MANUAL”. Lager the B gain, it will be bluer. The setting value range is 0-100. Default: 50 3.2.4. R-Gain (RED) Set the B and R gain value while the WHITE BALANCE mode is “MANUAL”. Lager the R gain, it will be redder.

  • Page 17: Noise Reduction

    3.3. NOISE REDUCTION NOISE REDUCTION NOISE REDUCTION =OFF =2D+3D Figure 10. NOISE REDUCTION 3.3.1. Noise Reduction Mode (MODE) Set the NR (Noise Reduction) control mode. Default: 2D+3D Table 9. NOISE REDUCTION - MODE Menu Value Description Item Not operating NR control. The 2DNR works.

  • Page 18: Noise Reduction Level(Level)

    3.3.2. Noise Reduction Level (LEVEL) Set the strength of NR. Default: AUTO Table 10. NOISE REDUCTION - LEVEL Menu Value Description Item AUTO Automatically control the strength of NR. Set the strength of NR to LOW. The noise increases when imaging a dark subject comparing with HIGH/MID, but the after-image will be less.

  • Page 19: Picture Adjust

    3.4. PICTURE ADJUST 3.4.1. GAMMA CORRECT Complete the ENTER operation while the GAMMA CORRECT is ON to open the setting menu. Default: GAMMA CORRECT = ON, GAMMA = 0.45, Y LUT EXTEND = UNIFORM OFF (1.0) Turn off the “GAMMA CORRECT” (γ≒1.0). Turn on “GAMMA CORRECT”.

  • Page 20: Contrast

    3.4.2. CONTRAST Adjust the contrast difference and color density difference of the image. The setting value range is 0-20. Default: 11 3.4.3. BRIGHTNESS Adjust the brightness of the image. The setting value range is 0-20. Default: 11 3.4.4. SATURATION Adjust the saturation of the image. The setting value range is 0-20.

  • Page 21: Auto Saturate

    3.4.7. AUTO SATURATE Control the saturation while the illumination of the subject is low. Default: MID Table 12. AUTO SATURATE Menu Value Description Item Retain the saturation even while the illumination of the subject is low. The chroma noise may be obvious, and the white balance may be shifted from the edge.

  • Page 22: Auto Edge

    3.4.8. AUTO EDGE Weaken the contour emphasizing during low illuminance. Default: OFF Table 13. AUTO EDGE Menu Value Description Item Retain the saturation even while the illumination of the subject is low. Weaken the contour emphasizing during low AUTO illuminance. EDGE The noise becomes slightly less but the contour of the subject may become blurred.

  • Page 23: Display Function

    3.4.9. DISPLAY FUNCTION Open the setting menu by the ENTER operation while the cursor is matched with “DISP.FUNCTION”. Default: FREEZE = OFF, MIRROR = OFF, IMAGE EFFECT = OFF Table 14. DISPLAY FUNCTION Menu Value Description Item Turn off FREEZE. FREEZE Turn on FREEZE.

  • Page 24: Functions

    3.5. FUNCTIONS 3.5.1. Digital Zoom (DZOOM) Display the partly enlarged image. Enlarged view by zoom and movable horizontally and vertically by pan and tilt. Default: OFF Turn off the “DZOOM” (1 time). Note that the PTZ (Pan, Tilt, and Zoom) settings turn back to the original setting when DZOOM was turned OFF without DZOOM SAVE after the setting of the position of Pan/Tilt and ZOOM RATIO.
  • Page 25 [Setting Method of OSD] -Set digital ZOOM RATIO: Operate LEFT/RIGHT while the cursor is on RATIO *Press “ENTER” to move the cursor to the “POSITION”. ENTER ZOOM Figure 15. ZOOM - Set the position of PAN/TILT: Operate UP/DOWN/LEFT/RIGHT while the cursor is on POSITION *Press “ENTER”...
  • Page 26 Table 15. RS232 – ZOOM Commands 0xpq and ZOOM RATIO *Coupling the low-order 4bit of 0x0p/0x0q to describe 0xpq. 0xpq Zoom ratio Output Format (in ZOOM command) 1080p/1080i 720p 0x00 - 0x03 x1.00 x1.00 0x04 x1.01 x1.01 0x05 - 0x08 x1.03 x1.03 0x09 - 0x0C...
  • Page 27 ⚫ PIP (Picture in Picture) Partly display the image which is DZOOM=OFF on the screen. Default: OFF The blue-colored box of the displayed part of PIP synchronizes with the range of PTZ. *When PIP is ON, the CVBS (NTSC/PAL) output does not display correctly and is not a failure. Figure 17.
  • Page 28 ⚫ DZOOM SAVE Save DZOOM setting to the camera. The setting of the position of PAN/TILT and ZOOM RATIO is while the DZOOM ON (*). *Excluding the PIP settings. The PIP settings were saved when PIP, PIP SIZE and PIP POSITION were operated.

  • Page 29: Defog

    3.5.2. DEFOG Correct by improving visibility of the image when the contrast becomes low by foggy or poor weather conditions. Default: OFF Turn off the “DEFOG”. Enable the “DEFOG (FIX)”. Open the setting menu by the ENTER operation. Table 16. DEFOG (ON) Menu Value Description...

  • Page 30: Dwdr

    3.5.3. DWDR Correct the contrast of the subject by the histogram equalization. Default: OFF Turn off the “DWDR”. Enable the “DWDR (FIX)”. Correct the contrast of the subject by the histogram equalization on the bright part. Open the setting menu by the ENTER operation. Table 18.

  • Page 31: Motion Detect

    3.5.4. MOTION DETECT Detect the motion in the image. Default: OFF Figure 19. MOTION DETECTION Turn off the “MOTION DETECT”. Turn on the “MOTION DETECT”. The detected part will be displayed in red. Open the setting menu by the ENTER operation. ⚫...
  • Page 32 ⚫ SIZE/POSITION Adjust the selected area size and position. - MOTION DETECT area position setting: Operate UP/DOWN/LEFT/RIGHT while the cursor is on the “POSITION”. *Press “ENTER” to move the cursor to the “SIZE”. ENTER MD POSITON Figure 20. MD POSITION - MOTION DETECT area size setting: Operate UP/DOWN/LEFT/RIGHT while the cursor is on the “SIZE”.

  • Page 33: Digital Image Stabilizer(Dis)

    ⚫ MOTION VIEW Switch ON/OFF of displaying the MOTION DETECT. Default: ON ⚫ VISCA ALARM Switch ON/OFF of the VISCA command output of the MOTION DETECT result. Default: OFF The MOTION DETECT result will be sent as the response command like below. Response to the MOTION DETECT result = 0x90, 0x07, 0x04, 0x1B, 0xXX, 0xFF The XX part shows the detected area.

  • Page 34: Backlight Compensation(Backlight)

    3.5.6. Backlight Compensation (BACKLIGHT) Make more visible the subject with backlighting, etc. Default: OFF Turn off the “BAKLIGHT”. Control the exposure by the entire image information. Match the exposure to the specified area on the image. The dark part will be more visible when metering only the dark part with backlighting. Open the setting menu by the ENTER operation.
  • Page 35 HSBLC Match the exposure to the specified area on the entire image except the brightest part. Make more visible the part except the headlight while imaging the subject including high brightness part. Open the setting menu by the ENTER operation. Table 21.

  • Page 36: Pixel Binning(Binning)

    3.5.7. Pixel Binning (BINNING) Enhance sensitivity by combining the A/D value of the adjacent pixels. The resolution of the image will be low. Default: OFF Turn off the “BINNING”. Turn on the “BINNING”. (AE MODE = MANUAL, SHUTTER = 1/60s, GAIN = 0dB, BINNING = OFF) (AE MODE = MANUAL, SHUTTER = 1/60s, GAIN = 0dB, BINNING = ON) Figure 24.

  • Page 37: Defect Pixel Compensation

    3.5.8. DEFECT PIXEL COMPENSATION Correct inconspicuously the defect pixel. Default: ON Turn off the “DEFECT PIXEL COMPENSATION”. Turn on the “DEFECT PIXEL COMPENSATION”. *The subject, which is similar with a defect pixel, may be corrected when it was imaged. In this case, turn off this setting.

  • Page 38: Multiple Exposure-Type Wdr(Wdr)

    3.5.9. Multiple Exposure-Type WDR (WDR) Make more visible of the subject with a large contrast. Synthesize one frame of the WDR image from the two frames of the long exposure and short exposure. The detail setting of the WDR image synthesis from the setting menu. The video resolution when WDR=ON will be lower than when WDR=OFF.
  • Page 39 Turn off the “WDR”. Turn on the “WDR”. Open the setting menu by the ENTER operation. Table 22. WDR Menu Value Description Item Display the WDR image synthesis. WDR ON FRAME Display only the long exposure image. LONG VIEW SEL Display only the short exposure image.

  • Page 40: Privacy Mask

    3.5.10. PRIVACY MASK Mask arbitrary area in the image. 8 different size, position and color masks can be displayed. Cannot use together the “PRIVACY MASK” and “CROSS LINE”. TYPE = SQUARE TYPE = POLYGON Figure 26. PRIVACY MASK Open the setting menu by the ENTER operation while the cursor is on the “PRIVACY MASK”. The settings in the Table 23 are available in the menu.
  • Page 41 Table 23. PRIVACY MASK Menu Value Description Item Turn off the “PRIVACY MASK”. MODE Turn on the “PRIVACY MASK”. SQUARE Set the mask with adjustable square size. TYPE POLYGON Set the mask adjustable the 4 corner coordinates. MASK NO. MASK 1-8 Select the mask No.

  • Page 42: Cross Line

    3.5.11. CROSS LINE Display vertical/horizontal line in the image. 8 lines (4 cross lines) for the total can be displayed with the setting of thickness, position, color and vertical/horizontal of each line. Cannot use together the “PRIVACY MASK” and “CROSS LINE”. Open the setting menu by the ENTER operation while the cursor is on the “CROSS LINE”.

  • Page 43: System

    The line 1 and 2 are displayed and line 3 -8 are hidden with the default when MODE = ON. Turn on the “DISPLAY” and select line 3-8 to display 3 or more lines. Figure 27. CROSS LINE 3.6. SYSTEM 3.6.1.

  • Page 44: Cam Title

    3.6.2. CAM TITLE Display letters on the right top on the screen. Default: OFF Turn off the “CAM TITLE”. Turn on the “CAM TITLE”. Open the setting menu by the ENTER operation. Table 26. CAM TITLE Menu Value Description Item A-Z, a-z, Set the letter to display.

  • Page 45: Menu Color

    3.6.3. MENU COLOR Set the OSD menu color. Open the software information display menu by the ENTER operation while the cursor is on the “MENU COLOR”. Default: TEXT COLOR =WHITE, TEXT (H) COLOR = YELLOW, B/G COLOR = BLACKOP, B/G (H) COLOR = WHITE OP Table 27.

  • Page 46: Output Format

    3.6.5. OUTPUT FORMAT Set the SDI output format from below. Default: 1080i60 1080i60 1080i59 1080i50 1080p60 1080p59 1080p50 1080p30 1080p29 1080p25 1080p24 720p60 720p59 720p50 Select output format, and select “ENTER -> YES” and complete the ENTER operation to switch the output format. *The 720p60, 720p59, 720p50 are output by compressing the imaged 1920 x 1080 pixel image with the image sensor to 1280 x 720 pixel.

  • Page 47: Cvbs Format

    3.6.6. CVBS FORMAT Set the CVBS output format. Default: NTSC1 NTSC1 PAL1 Output NTSC/PAL format after compressing horizontally the 1920 x 1080 pixel (aspect ratio 16:9) imaged with an image sensor to aspect ratio 4:3. The both ends of the viewing angle can be seen even though the image is distorted due to the horizontal compression.
  • Page 48 *When the PIP on the DZOOM function is on, the CVBS side image does not output correctly and it is not a failure. *Start with the arbitrary CVBS Format setting by the following operation. The color bar will be displayed when the camera is started. Press “ENTER” to release the color bar display. ・NTSC1 ->...

  • Page 49: Factory Reset

    3.7. FACTORY RESET Figure 30. FACTORY RESET Restore the factory default by completing the ENTER operation while the cursor is on the “YES”, and the camera restart after a specified period.

  • Page 50: Osd Menu Tree

    4.OSD menu tree Legend: Represents OSD menu item Represents the operation by UP, DOWN and ENTER key of the remote control Represents the operation by RIGHT, LEFT and ENTER key of the remote control Represents a selectable mode and setting value of each menu item Represents the title on the OSD and not a setting item Default : in Red ○MAIN MENU...
  • Page 51 ○WHITE BALANCE *This setting is not applicable for the WAT-3200. WHITE BALANCE MODE ATW, ONE PUSH, INDOOR, OUTDOOR, MANUAL PUSH BLUE 0 - 100 (50) 0 - 100 (50) SPEED 0 - 7 OFFSET-B 0 - 100 (50) OFFSET-R 0 - 100...
  • Page 52 ○DISPLAY FUNCTION DISPLAY FUNCTION FREEZE OFF, ON MIRROR OFF, MIRROR, V-FLIP, BOTH(H/V) IMAGE EFFECT OFF, NEGATIVE, GREY, REDDISH-1~4, BLUISH-1~4, GREENISH-1~4 PICTURE STYLE OFF, STANDARD, VIVID, CLEAR, VIVID CLR, NEUTRAL PIC CONTRAST 0 - 6 PIC SATURATION 0 - 6 PIC EDGE 0 - 6 RETURN...
  • Page 53 ○FUNCTIONS FUNCTIONS DZOOM -> to "D-ZOOM" menu. OFF, ON DEFOG -> to "DEFOG" menu. OFF, ON, AUTO DWDR -> to "DWDR" menu. OFF, ON, AUTO MOTION DETECT -> to "MOTION DETECT" menu. OFF, ON OFF, ON BACKLIGHT -> to "BACKLIGHT - BLC"/"BACKLIGHT - HSBLC" menu. OFF, BLC, HSBLC BINNING OFF, ON...
  • Page 54 ○DWDR SETUP DWDR SETUP STRENGTH 0 - 16 SATURATION 0 - 16 LOCAL RATIO 0 - 16 SAT. SYNC OFF, ON AUTO LEVEL HIGH, MID, LOW RETURN ○MOTION DETECT MOTION DETECT AREA AREA 1, AREA 2, AREA 3, AREA 4 AREA ENABLE OFF, AREA DISPLAY...
  • Page 55 ○WDR FRAME VIEW SEL ON, LONG, SHORT WDR STRENGTH 0 - 29 (12) LOCAL CONTRAST 0 - 5 WDR AE MODE AUTO, MANUAL AE BRIGHT 0 - 19 (10) GAIN 0 - 19 SHUTTER 0 - 19 (19) EXPOSURE RATIO 1:32, 1:16 DEFAULT RETURN...
  • Page 56 ○PRIVACY MASK PRIVACY MASK MODE OFF, ON TYPE SQUARE, POLYGON MASK NO. MASK 1~8 DISPLAY OFF, ON COLOR BLACK, WHITE, GREEN, BLUE, RED, CYAN, MAGENTA, YELLOW, GRAY-1~6 POLY SELECT L-TOP, R-TOP, L-BOTTOM, R-BOTTOM POSITION-X 0 - 255 POSITION-Y 0 - 216 SIZE-X 1 - 60 SIZE-Y...
  • Page 57 ○SYSTEM SYSTEM S/W INFO -> to "S/W INFO" menu. CAM TITLE -> to "CAM TITLE" menu. OFF, ON MENU COLOR -> to "MENU COLOR" menu. MENU POSITION DEFAULT, TOP-LEFT, TOP-RIGHT OUTPUT FORMAT 1080i60, 1080i59, 1080i50, 1080p60, 1080p59, 1080p50, 1080p30, 1080p29, 1080p25, 1080p24, 720p60, 720p59, 720p50 CVBS FORMAT NTSC1, PAL1, NTSC2, PAL2 RETURN...
  • Page 58 ○FACTORY RESET FACTORY RESET ?

  • Page 59: Rs232 Command List

    WAT-2200Mk-2 & WAT-3200 visca command-list (1/2) BaudRate:9600bps, Databits:8, Parity:None, Stopbits:1, Flowcontrol:none menu1 menu2 menu3 setting/(operation) set command inquiry command response for inquiry command AUTO 0x81, 0x01, 0x04, 0x39, 0x00, 0xFF 0x90, 0x50, 0x00, 0xFF EXPOSURE AE MODE 0x81, 0x09, 0x04, 0x39, 0xFF...
  • Page 60 WAT-2200Mk-2 & WAT-3200 visca command-list (2/2) BaudRate:9600bps, Databits:8, Parity:None, Stopbits:1, Flowcontrol:none menu1 menu2 menu3 setting/(operation) set command inquiry command response for inquiry command 0x81, 0x01, 0x04, 0x5B, 0x01, 0xFF 0x90, 0x50, 0x01, 0xFF PICTURE ADJUST GAMMA CORRECT 0x81, 0x09, 0x04, 0x5B, 0xFF OFF(1.0)
  • Page 61 WAT-2200Mk-2 & WAT-3200 pelco command-list BaudRate:9600bps, Databits:8, Parity:None, Stopbits:1, Flowcontrol:none type operation command response pelco-d flip(H+V) on/off 0xFF, 0x01, 0x00, 0x07, 0x00, 0x21, 0x29 0xFF, 0x01, 0x00, 0x01 OSDMenu on-off 0xFF, 0x01, 0x00, 0x07, 0x00, 0x5F, 0x67 OSDMenu Up 0xFF, 0x01, 0x00, 0x07, 0x00, 0x60, 0x68...

This manual is also suitable for:

Wat-2200mk-2

Table of Contents