Noise Reduction; Noise Reduction Mode (Mode) - Watec WAT-2500 User Manual

3.3. NOISE REDUCTION

NOISE REDUCTION

3.3.1. Noise Reduction Mode (MODE)

Set the NR (Noise Reduction) control mode.
Default: 2D+3D
Menu
Value
Item
OFF
2D
MODE
3D
2D+3D Control NR by combining 3DNR and 2DNR.
=OFF
Figure 8. NOISE REDUCTION
Table 5. NOISE REDUCTION - MODE
Not operating NR control.
The 2DNR works.
Reduce noise by the edge preserved smoothing.
The contour of the subject may be blurred.
The 3DNR works.
Reduce noise by analyzing the differences as the noise
between consecutive frames.
The after-image may be obvious depends on a subject.
NOISE REDUCTION
=2D+3D
Description
15