White Balance; White Balance Mode (Mode); One Push Trigger (Push) - Watec WAT-2500 User Manual

3.2. WHITE BALANCE

3.2.1. WHITE BALANCE MODE (MODE)

Set the WHITE BALANCE control mode.
This setting is not applicable for the WAT-3500.
Default: ATW
Menu
Value
Item
ATW
ONE PUSH
MODE
INDOOR
OUTDOOR
MANUAL

3.2.2. One Push Trigger (PUSH)

Complete the WHITE BALANCE convergence movement while the WHITE
BALANCE mode is ONE PUSH. The B and R gain value after completing PUSH
operation retains even when the power of the camera was turned off, or the
WHITE BALANCE mode was changed.
When the "3.7. FACTORY RESET" is completed, the B and R gain value after
completing PUSH operation will return to default settings.
Table 4. WHITE BALANCE - MODE
Automatically follow WHITE BALANCE (Approx. 2000K-
15000K)
by matching the color temperature of a subject.
The range of color can follow is wider than the
INDOOR/OUTDOOR.
Fix WHITE BALANCE at the specific color temperature.
Combined use the WHITE BALANCE convergence
movement (PUSH).
Utilize the WHITE BALANCE convergence movement
(PUSH) to complete while imaging such as a white paper.
WHITE BALANCE automatically follows (Approx. 4600K-
7200K).
Set as easy to follow indoor light source (fluorescent light,
etc.).
WHITE BALANCE automatically follows (Approx. 4600K-
10000K).
Set as easy to follow outdoor light source (sunlight, etc.).
Manually set WHITE BALANCE.
13
Description