Table of Contents
Advertisement
3.5. FUNCTIONS
3.5.1. Digital Zoom (DZOOM)
Display the partly enlarged image.
Enlarged view by zoom and movable horizontally and vertically by pan and tilt.
Default: OFF
OFF
Turn off the "DZOOM" (1 time).
Note that the PTZ (Pan, Tilt, and Zoom) settings turn back to the original setting
when DZOOM was turned OFF without DZOOM SAVE after the setting of the position
of Pan/Tilt and ZOOM RATIO.
ON
Turn on the "DZOOM and PAN/TILT".
The setting which is saved as DZOOM SAVE after the setting of the position of
PAN/TILT and ZOOM RATIO will be read.
Cannot use together the "DZOOM".
Open the setting menu by the ENTER operation.
The following settings are available in the menu.
ZOOM CONTROL
⚫
Set the position of PAN/TILT and zoom magnification.
The setting range of DZOOM RATIO is below.
・x1.00 - x6.00
The setting range of PAN/TILT is 0x00 – 0xF0. The PAN/TILT setting value is not
displayed.
(DZOOM = OFF)
(DZOOM = ON, ZOOM = x3.00, PAN =34, TILT =134)
Figure 12. DZOOM
22
Advertisement
Table of Contents
