Table of Contents
Advertisement
3.6.5. CVBS FORMAT
Set the CVBS FORMAT. Selectable from below.
The default setting is marked on the serial label attached on the packing box or on
the camera. (NTSC or PAL for the WAT-2500 and EIA or CCIR for the WAT-3500.)
Both WAT-2500 and WAT-3500 crop the portion of 1920 x 1080 pixels captured by
the image sensor, excluding the 240pix at the beginning and end of the horizontal
direction, to 1440 x 1080 pixels (aspect ratio 4:3) and then output the image in the
following output formats.
[WAT-2500]
NTSC
PAL
[WAT-3500]
EIA
CCIR
3.7. FACTORY RESET
Restore the factory default by completing the ENTER operation while the cursor
is on the "YES", and the camera restart after a specified period.
Figure 22. FACTORY RESET
38
Advertisement
Table of Contents
