Display Function; Reset Picture Adjust (Default) - Watec WAT-2500 User Manual

3.4.9. DISPLAY FUNCTION

Open the setting menu by the ENTER operation while the cursor is matched with
"DISP.FUNCTION". Default: FREEZE = OFF, MIRROR = OFF, IMAGE EFFECT = OFF
Menu
Item
OFF
FREEZE
ON
OFF
MIRROR
MIRROR
V-FLIP
BOTH(H/V)
OFF
NEGATIVE
GREY
REDDISH-1 - 4
IMAGE
EFFECT
BLUISH-1 - 4
GREENISH-1 - 4

3.4.10. Reset Picture Adjust (DEFAULT)

PICTURE ADJUST: Restore the settings in the menu of PICTURE ADJUST to factory
default.
Table 10. DISPLAY FUNCTION
Value
Turn off FREEZE.
Turn on FREEZE.
Turn off MIRROR.
Invert to right and left of the image.
Invert to up and down of the image.
Invert to up, down, right and left of the image.
Turn off IMAGE EFFECT.
The negative-positive reversal on the contrast
and color of the image.
Make the image to achromatic color.
Make the image to red monochrome.
Color density range: 1-4
*This setting is not applicable for the WAT-
3500.
Make the image to blue monochrome.
Color density range: 1-4
*This setting is not applicable for the WAT-
3500.
Make the image to green monochrome.
Color density range: 1-4
*This setting is not applicable for the WAT-
3500.
Description
21