2. Configuring the camera function
The function of WAT-2500/3500 can be set by the RC-01 (remote controller).
Utilize the option RC-01 (remote controller) to set function through OSD (On Screen
Display) menu.
2.1. RC-01 (Remote Controller)
Operate the OSD menu by the RC-01.
Connect the RC-01 to the REMOTE terminal on the rear of the camera. Remote
controller unit providing access to adjustments, settings the functions on the OSD
menu.
*When using the remote controller, vertically insert the connector fully until it clicks.
When disconnecting the remote controller, pull the connector while pinching the
lock.
1. UP,
2. DOWN
3. LEFT, 4. RIGHT
5. ENTER
Figure 1. RC-01 (remote controller)
: Cursor control for selecting the OSD menu items.
: Change the settings or value on the OSD menu.
: Open the OSD menu. Execute the selected item or function.
6