Advertisement
Quick Links
1/3.2" Ultra-compact High Sensitivity Day/Night Camera
WAT-1300 / CS
Thank you for purchasing the "1/3.2" Ultra-compact High Sensitivity Day/Night Camera WAT-1300 / CS " (reffered to as the
"product" or "camera" in this manual). This operation manual covers safety, functions, installation and the correct operating
procedure for the camera. First, we ask you to read this operation manual thoroughly, then install and operate the product as
advised. For future reference, we also advise safekeeping of this manual. If you do not understand the installation, operation
or safety instructions expressed in this manual, please contact the distributor or dealer from where the camera was purchased.
Not understanding the contents of the operation manual sufficiently may cause damage to the camera, personal belongings
and/or result in injury. Watec is not responsible for any inconvenience or the attendant damages to the video and monitoring
recording equipment caused by misuse, miss-operation or improper wiring of our equipment.
To Use This Product Safely
Watec cameras are designed to be used safely. If not used safely, it may lead to a physical accident caused by fire and
electric shock. Therefore, please keep and read the "Cautions for safety" (P.2) for protection against accidents.
Guide to the Safety Symbols
"DANGER" indicates a compulsorily prohibition to prevent accidents.
"Warning" may lead to a serious accident such as death or injury caused by fire or electric shock.
"Caution" may incur injury and cause damage to the camera and/or peripherals in the surroundings.
Power Supply
For the product, use a stabilized power adaptor designed for DC+5-12V with a current capacity of more than 350mA.
Wiring of the connector must be exact (see "Description of Parts" (P.3) "⑥2P Cable" ).
Utilize the option CB-10 (Cable with connectors).
Operation Manual
| 01 |
Advertisement
Related Manuals for Watec WAT-1300/CS
Summary of Contents for Watec WAT-1300/CS
- Page 1 To Use This Product Safely Watec cameras are designed to be used safely. If not used safely, it may lead to a physical accident caused by fire and electric shock. Therefore, please keep and read the “Cautions for safety” (P.2) for protection against accidents.
-
Page 2: Cautions For Safety
Cautions for Safety Please read and understand the “Cautions for safety” below to ensure the correct use of the product. ・Do not disassemble and/or modify the camera. ・Do not operate the camera with wet hands. ・Use the camera within the range of the power supply voltage specifications The recommended voltage is DC+5-12V. -
Page 3: Description Of Parts
Contents Referring to the illustration below, confirm all parts are present upon receipt of camera. 2P Cable (300mm) Lens Mount Cap WAT-1300 / CS (Camera) MCX-BNC Cable Description of Parts Front ①IMAGE SENSOR / Sensor Window The light receiving face of the image sensor. Dirt, water or oil deposits on the image sensor will cause an unclear picture on the monitor. -
Page 4: Setup And Operation
Set-up and Operation 1) Ensure that the power to the camera and the peripheral equipment is turned off before making any connections. 2) Remove the lens mount cap from the camera. 3) Connect the 2P Cable to “④POWER IN TERMINAL” . 4) Turn on the power to the camera, monitor and all other allied equipment. 5) Connect the MCX-BNC cable to "②VIDEO OUT TERMINAL"... -
Page 5: Problems And Troubleshooting
Warranty All Watec products before being shipped to our customers are tested and inspected to ensure that our products are not faulty and are of the highest quality as directed by our Watec Quality-control System. Watec camera have a 3-year warranty, and the board camera units and peripherals have a 1-year warranty, provided that the products have been operated in accordance with our operation manual and have not been altered in any way.