Installing The Main Silencer; Changing The Glass Fiber Yarn Filling In The Main Silencer - Husqvarna FE 250 Owner's Manual

12.28

Installing the main silencer

12.29

Changing the glass fiber yarn filling in the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, but the performance characteristics change.
SERVICE WORK ON THE CHASSIS 12
Main work
–
Position the catalytic converter in the main silencer.
S02101-10
–
Position the main silencer.
–
Mount screws
–
Attach spring
Spring hook (50305017000C1)
–
Tighten screws
Guideline
Remaining screws,
chassis
S03561-11
Finishing work
–
Install the right side cover. (
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove main silencer. (
1
, but do not tighten yet.
2
.
1
.
M6 10 Nm (7.4 lbf ft)
p. 70)
p. 66)
p. 67)
p. 67)
p. 65)
p. 69)
p. 70)
71